New
York City Department of City Planning
Long Island City Executive Summary:
Description of Queens Plaza Subdistrict Map
This map shows the Queens Plaza subdistrict and its
four areas: A-1, A-2, B and C. These areas have different
manufacturing/residential zone pairings and bulk regulations
as follows:
Area A-1: M1-6/R10, 12 FAR, minimum street wall height
of 60', no maximum street wall height.
Area A-2: M1-6/R10, 12 FAR, minimum street wall height
of 60', maximum street wall height of 150'.
Area B: M1-5/R9, 8 FAR, minimum street wall height of
100', maximum street wall height of 150'.
Area C: M1-5/R7-3, 5 FAR, minimum street wall height
of 60', maximum street wall height of 100'.
Also identified are sidewalk widenings and permitted
streetwall setbacks in Area A-1 and special permit sites
for additional three FAR on two blocks in Area C.
Return to the Long
Island City Rezoning Executive Summary page.
|
